10 Tips to Make Your Swamp Cooler Colder and More Efficient

How do you call your evaporative cooler with a greater intimacy to it? More like a connection with it. Oh, I guess you call it a swamp cooler. Why do you need to love it? Simple. It cuts down your electricity bills

Summer is undeniably the time where most electricity bills go up because of the temperature. But for you, you don’t need to worry about it because you possess the swamp cooler. But what is the difference between a swamp cooler and an air-conditioner?

Simple. The air conditioner is heavily dependent on electricity, which costs. An air-conditioner needed electricity to keep its refrigerant progressing towards its condenser coils. The greatest advantage of a swamp cooler is that it utilizes the natural evaporation system that will cool your home.

Though you should also take note that the swamp cooler uses electricity sometimes, and that is to run its fan.

The following list is the most deliberate advice from Helloportable.com for making the most of all evaporative coolers.

  1. A dry climate is an advantage

Freshwater is the lifeblood of an evaporative cleaner. It reduces the temperature as it dissipates its freshwater stock into the air. Most people would use the cooler during the humid days, which lessens is a set-up that is bound to fail. You could decide where the air she blows through the system’s fan. If you relate it to daily activities, people tend to sweat more during humid days. This also applies to the natural system of evaporative coolers.

Naturally, a human body is usually in its vulnerable state where it releases evaporated sweat into the air. This is because moisture accumulates fast. With evaporative cleaners, it couldn’t release evaporative water quickly because of the high levels of humidity. The lesson here is that you can efficiently use the swamp cooler

  1. Use it sparingly

Unless you live in the desert, it must be best if you would only purchase a portable evaporative cooler. Some people would make the mistake in purchasing the full house model without considering the cost. The portable unit is a convenient one that you can move from one place to another. You can even move it outdoors if need be.

The humidity level that certain the efficiency of swamp coolers is around 70 percent. When it gets to more than that, such as 7t percent, then there’s a chance that it will not work it’s best. The situation will even be worse because the air will be damper. The best way for you to be certain when to use the cooler best is to always be updated with the weather. Another good tip is for you to use it during dry days rather than using the air conditioner.

  1. The Windows should not be closed

In traditional air-conditioning, the environment must be enclosed. But the swamp cooler is an innovation that works best when fresh air is around. With this innovation, we should be open to learning skills on using this. A swamp cooler works best when the water released is evaporated into the air. But make sure that your environment is not too humid because the power of the cooler may be reduced. If your home is naturally humid, opening the windows will be the best way because, through this, we release damp air out and invite dry air inside. Our goal here is to create a cross breeze effectively. To achieve this strategy, it might take some trial and error where you may position your cooler and how many Windows will you open.

  1. A dehumidifier is an advantage

If you don’t want to open the Windows, there is also another way. The other option is to use a dehumidifier to help in cooling. What does a dehumidifier do? It invites extra moisture from the atmosphere and stores it at its water tank until it’s contents are released.

A humidifier can aid in the cooling process especially during summer. Where can you place your humidifier to achieve its best results? Near the coolers intake grill. This will ensure excellent evaporation because it ensures that the driest air will pass across the cooling pads.

  1. Be nature lover

Because humidity is a natural process that we have little to no control at all, we turn to other alternatives in reducing it such as adding houseplants at home. Why is this effective? Houseplants absorb excess moisture in the air. Plants are sensitive to sources of water around them and that includes the air around them. Aside from its natural absorption features, houseplants also add life to the home. You can start with a cactus.

  1. Strategic positioning

Not all swamp coolers are designed for big venues. Most of the units can accommodate a mere single room only. With this limitation, it is your responsibility to measure the square feet that the unit can accommodate. Remember that it’s effectiveness is only possible with the size of the room it could accommodate.

You can position the cooler in whatever corner you would want it b3st to operate such as at the dining table or living room. It is possible that you can position it where it will hit you directly. The cooler has it’s built-in wheels, so you can move it freely around the house until you can find it’s best to place.

  1. Priming the pads should be prioritized

The cooling pads, for the first time in use, will take Some time to fully absorb water. When they absorb water, they wick water from the tank to sustain its wetness. This usually takes around ten to fifteen minutes for the pads to be saturated.

To void complications, it is best to fill the water reservoir first and wait for the pads to work before you turn on the fan. Why do you have to do this? Because it will avoid wasting electricity by blowing hot air before the machine is given time to attain its full cooling capability.

  1. Coldwater should be utilized

Cool water is better than hot water when it comes to evaporation. 50-degree water will work better in the evaporative cooler. Contrary to belief, hot water decreased the performance of the cooler.

  1. Don’t use ice

Although cold water is advisable to use, too much of it could also be dangerous. There is a limit to how cold the water should be. Using ice should be avoided at all costs because it takes too much time for it to evaporate. Ice needs to melt first before undergoing the process of evaporation.

  1. Taking care of the cooler is just like any other appliance

No matter what the object is, it will last with proper maintenance. A cooler has to be thoroughly cleaned. Inspect your unit for accumulated dust and other substances then remove it before using it.

Make sure to wipe the exterior parts, vacuum through it especially with the fans and intake grills, empty the tank and use soap and water, Inspect cooling pads for cracks, replace parts when needed. Wipe down the exterior

  • Vacuum air intake grills and fans
  • Wash out the water tank with a mild soap and water solution
  • Inspect cooling pads for cracks or mildew, replacing as needed
  • Before storing your evaporative cooler for winter, make sure that you have dried and cleaned it.

Everybody would want the swamp cooler because it will consistently be an advantage in reducing electricity bills and it’s cooling properties. But what is a technology without the proper knowledge of handling it? It is wise to assume that an evaporative cooler, though more advanced than an air-conditioner may require a people handling. To get the most of its features, we must learn how to use it in the right way.