Boat windshields – Tips for replacing and choosing the right type

Boat windshields serve an important purpose on any vessel, large or small. In addition to providing a clear view of the water ahead, they help to protect against the elements, including sun, wind, and spray from waves.

Boat windshields are typically made from Plexiglas or other shatter-resistant materials, and they are designed to withstand the rigors of marine use.

Choosing a boat windshield

The right boat windshield can make all the difference in your boating experience. Not only does it need to be comfortable, but it also needs to be durable and stylish. Depending on the type of boat you have, there are a variety of different windshield styles to choose from.

You also want to make sure that it is properly installed and secured.

A windshield that is too small will not provide adequate protection from the elements, while a windshield that is too large can block your view and make it difficult to navigate.

To determine the right size, measure the length and width of the area where the windshield will be installed.

Once you have these dimensions, you can begin shopping for a windshield that is the right size for your boat. With a little careful planning, you can find some great aftermarket boat windshields that will provide years of protection and enjoyment.

Boat windshield replacement tips

Replacing a boat windshield is a fairly simple process, but it’s important to take your time and do it right.

The first step when getting started is to remove the old windshield from the boat. If the old windshield is held in place with screws, simply remove the screws and set the windshield aside.

If the old windshield is glued in place, you’ll need to use a putty knife to carefully pry it loose. Once the old windshield is removed, clean up any adhesive residue from the surface of the boat.

Next, measure the opening for the new windshield and cut a piece of glass to size. Make sure to wear gloves while you’re working with the glass. Once the new piece of glass is cut to size, apply a generous amount of silicone sealant around the perimeter of the opening.

Carefully set the new piece of glass in place and use strips of masking tape to hold it in place while the sealant dries. After 24 hours, remove the masking tape and enjoy your new boat windshield!

Ultimately, the choice of the windshield is a matter of personal preference. A good windshield will give you years of trouble-free service and help you enjoy your time on the water.

However, it is important to make sure that the style you choose fits with the overall design of your boat. With a little bit of care and forethought, you can find the perfect windshield for your boat.

When choosing a boat windshield, it is important to consider the size and layout of the vessel, as well as the type of boating you will be doing. For example, a fishing boat will require a different windshield than a sailboat.

By taking the time to select the right boat windshield for your needs, you can be sure that you will have a safe and enjoyable boating experience.