Install skirting boards to renovate your home. It will bring a new look and update your home. Whether you are going to replace the old skirting board or applying it for the first time, build a project, and then work on it.
If you follow a step by step process, you will find this work interesting. If you are renovating the entire home from floor to ceiling, then have the skirting boards installation Perth at the end. Install skirting before fitting the carpet to the floor.
If you are remodeling an old house, remove the already applied skirting board with the help of a knife. Clean the surface from dust the dust cause resistance in the adherence of the skirting board.
Tool List:
The following tools are necessary before applying the baseboards to the walls:
- Pencil
- Hammer
- Silicon Gun
- Coping Saw
- Measurement Tape
- Miter box
Materials:
Collect the following essential material before the installation of baseboards:
- Drill
- Skirting Boards
- Nails & Screws
- Wood filler
- Decorator caulk
Skirting board Installation Perth
Before installation read a useful guide about how to install a Skirting board is crucial. The following are some key steps that will guide you properly.
Step1:
Measure the skirting boards with a measuring tape. For the fixation of the skirting board, measure 20% extra for cutting. Do not forget to measure the area where you have to fit the skirting boards.
Step2:
Select the side of the skirting board that you have to use. All the skirting boards have two profiles that can be used equally. You have to choose which side fits properly. Mark the selected side with a pencil to avoid any problem.
Step3:
For internal corners, cut the skirting boards at an angle of 45 degrees. It will fit properly to the inner corners of the walls. You can use the miter box for cutting.
Step4:
Use a coping saw to cut the extra portion of the skirting board. If the corners moulding is intricate, take a few minutes to make it smooth and even.
Step5:
Now fit the skirting board to the walls. If you are satisfied with the look which appears after applying the skirting boards, then fix it with glue. Fill the gap between two parts of boards with the help of gap filler or compound powder.
Screws can be used to fix the skirting board. The use of glue is more common as there are many high adhering types of glue are available.
Step6:
Press the skirting boards firmly to fit it properly. Use sandpaper to make the corners smooth. Purchase a sealant and apply it at the corners it will seal the skirting boards to the walls.
Final Words:
The skirting boards garnishes the room and brings a new innovative look. If the walls of your room are ruptured and damaged must apply the skirting board. Always choose the board according to the color of your room ceiling.
Several types of skirting boards are in the market and available at reasonable prices. The wooden and vinyl skirting boards are more common.