After you have made the decision to use laser cutting for your work, you have a wide range of options available to choose from. What type of laser cutting method will be best suitable for your project? This is an important question to answer before you commence your project: should you pick fiber laser cutting or go for CO2 laser cutting? Laser isn’t a bad choice but one need to know what is better fit for the material they are going to cut. Both the options have their own sets of advantages and disadvantages. Below here are some of the advantages and disadvantages of CO2 laser cutting machines mentioned:
Because the cutting beam of laser is usually limited to pinpoint accuracy, you may expect a lot of less loose debris getting out during the cutting procedure which doesn’t give you the headache to clean up your place. CO2 lasers are better known to create precise edge quality on thick metals such as steel and aluminum while other lasers need to put more effort to achieve similar results.
A CO2 laser is usually less costly and a precise way to get metal cut in the manner you want. Most CO2 lasers work on electricity and the beam is redirected to aim with a range of mirrors to create infrared light beam which isn’t seen by human eye. A CO2 laser proves to be a perfect option for those who want variety in their cuts or need to cut different kinds of materials.
The procedure to change the power or width of the beam is simple and you can get different varieties of cuts. Due to its amazing range, CO2 lasers can be used to cut several other things than mere metal. You can use them to cut metals, plastic, paper and more.
Some of the disadvantages of CO2 laser cutting machine are given below:
- Going for a CO2 machine with high power could literally burn a hole in your pocket.
- The photo electric conversion rate involved in the procedure is merely 10 percent and the consumption of power is more.
- Sometimes it may get tough to maintain CO2 laser cutting machine.
However, the CO2 laser cutting machines at DXTECH are simple to use and offer good operation requirement.
Some highlights of CO2 laser cutting machines:
- Quality: You get consistent quality all over the thickness of the metal.
- Flexibility: It is recommended for all types of material thicknesses.
- Safety: The laser light of CO2 is well- absorbed by the frame of the machine that diminishes the chances of irreplaceable retina damage. The technicians shouldn’t see the cutting procedure via an acrylic panel in the door because the vibrant plasma may endanger your eyesight over a time period. (Somewhat as seeing the sun).
- Flame cutting (or cutting through oxygen) – You will find no difference in the speed or quality between both the kinds of lasers.
So, if you are looking forward to buy CO2 laser cutting machines, then get all the details you need at DXTECH.