Australians taking the sky for the first time since the Covid pandemic ended are noticing the tiny ‘hole’ on their plane windows for the first time – and have questioned what it does.
Known as the ‘bleed hole’ the tiny opening in the window of commercial passenger planes is actually an important safety feature, according to aviation experts.
The hole helps to regulate how much pressure from the cabin is exerted onto the window’s panes and it makes sure that if the window is going to break, the outer pane goes first.
So it’s best not to touch the bleed hole or cover it in any way, so it can do its job effectively while you’re in the air.
Known as the ‘bleed hole’ the tiny opening in the window of commercial passenger planes is actually an important safety feature, according to aviation experts
This information appeared to ‘blow the minds’ of eager travelers online, with a post on the holes going viral.
While hundreds of others revealed they had ‘never noticed’ the holes.
‘The way I’ve never noticed but I’m gonna look when we fly up,’ one woman said.
While others wondered what would happen if everyone ‘blocked the holes’ not realising they are in the centre pane of a three-pane system.
The question was posed by Robbie Gonzalez from iO9 to director of technology Marlowe Moncur, from GKN Aerospace.
A patent filed by Daimlerchrysler Aerospace Airbus in 1997 explained that this ‘air conduit’ helps maintain ‘external atmospheric pressure inside’ the panes.
On a plane, the air is pressurised by engines that compress it as it moves through a series of fans.
To maintain cabin pressure, even at high altitudes, this incoming air is held within the cabin using a so-called outflow valve.
To maintain cabin pressure, even at high altitudes, this incoming air is held within the cabin using a so-called outflow valve
It works in a similar way to how a tyre is inflated – high-pressure air is ‘pumped’ into the cabin and this air comes from the compression stage of the engines.
Sensors gauge how much pressure is in the cabin and this valve releases the air at a rate that maintains this pressure.
For example, when the plane is stationary, this valve is open. It only starts to close as the plane takes off.
The air at sea level is said to be around 14.7 pounds per square inch (PSI).
By comparison, a typical flight cruises at between 9,150 metres and 12,200 metres and at this altitude the pressure is approximately 4.3 PSI.
Due to a lack of oxygen at high altitudes, the plane has to be pressurised in such a way that makes it comfortable and safe for passengers.
Philip Spiers, head of Advanced Structural Testing Centre at the University of Sheffield Advanced Manufacturing Research Centre (AMRC) with Boeing told MailOnline that at high altitudes ‘there are not enough oxygen molecules to sustain life.
‘Low pressure lowers the boiling points inside the body and at the edge of space, this can cause blood and tears to boil.’
Planes don’t go that high, but their flying altitude is usually higher than Mount Everest and they take air for the cabin from the engines.
These engines spend their time compressing air at the front to generate thrust, but Mr Spiers continued that they also bleed off some of that air in the process, dehumidifying it and pumping it into the cabin to provide the pressure.
‘Planes have a higher pressure inside than outside,’ Mr Spiers said.
‘It’s like a bottle of Coca Cola – shaking a bottle makes it go stiff and hard but when you undo it, it becomes floppy again. This stretches the skin around the plane.’
Typically the air inside the cabin is maintained at around 11PSI, the levels of pressure experienced at around 2,130 metres. And this change in pressure is what causes a person’s ears to pop.
To maintain this pressure, the plane’s structure and its windows need to be able to handle the differential between the cabin pressure and the outside of the plane.
As a result, windows on commercial planes typically have three panes – outer, middle and inner – made of acrylic and glass.
Mr Spiers continued that the plastic pane on the inside of the plane is to prevent passengers from getting access to the glass panes in the middle and on the outside.
There is a middle pane of glass with a hole in it, then an air gap, followed by an outside pane of glass.
This hole helps maintain the pressure differential and directs it onto the outer pane rather than the inner pane.
This hole helps maintain the pressure differential and directs it onto the outer pane rather than the inner pane (stock image)
‘If the pane was sealed [and didn’t have a hole in it], all the pressure in the cabin would act on the inside pane of glass,’ continued Mr Spiers.
‘You want [this pressure] to act on the outside pane because if there is a problem with the outside it would be possible to see it during inspection.
‘If this pressure blows that pane out, the inside pane is still strong enough to hold the pressure. You don’t want to see the inside pane fail first as the inspectors wouldn’t see that.’
‘Plus, this gives enough time for the plane to drop to a lower altitude to manage the issue.’
Michal Weiszer, research fellow at the School of Engineering at the University of Lincoln added:
‘During flight, the cabin is pressurised and therefore it is necessary to equalise the pressure between the inner pane and the actual window, so the outer window holds the load of the pressure difference.
‘Furthermore, the hole prevents from moisture building up between the panes.’
And Dr Raf Theunissen, lecturer in aerodynamics in the Department of Aerospace Engineering at the University of Bristol, said: ‘You can understand why airplane companies put these additional windows in by just looking at the number of scratches on them.
‘We wouldn’t want to have scratches on the actual window because it reduces the strength.’
***
Read more at DailyMail.co.uk