A Vaporizer starter kit is essentially designed to provide you with all that you need in order to begin vaporizing for the very first time. It includes a coil, a glass jar, a battery and a mouthpiece.
These are all the four essential parts of any Vaporizer kit. However, if you want to have a smooth easy time vaporizing you are better off without the other four pieces. However, they are included to make the Vaporizer kit even easier to use.
The very first thing that can be noticed when starting to use the Vape starter kit is not having a ground of ground glass or a base to keep the liquids on. This is because the coil is not yet built up.
To do this you must first put the batteries in the outer box that comes with the kit. When putting batteries in, the directions that come with your Vaporizer should be followed exactly. They will give you exact steps on how to go about building your Vaporizer.
Once you have batteries, you can then start assembling your vaporizer. The kit comes with a long metal wire that will be used to hook up the electronic components like the heater and the screen.
When you hook up the components to make sure that the wires are placed on the stainless steel because if you hook them up on anything else it will melt through the plastic and will likely cause an accident.
After you have all the electronic components in place, the last thing you have to do is put your favourite e-Cig flavours into the kit. You can choose between five (5) different flavours that are pre-loaded into the kit.
The vaporizer will take a few seconds to heat up and will produce clouds of vapour that you can inhale while you enjoy your favourite fruit or vegetable juice. Because these advanced vapers have a lot of power, it takes about a minute for each cloud to be produced.
To recharge the batteries, you will need to connect the charger to the battery, which plugs into the USB port on the side of the kit. Then all you have to do is put in the batteries and put the power switch on in order to turn on the unit. After that, all you have to do is put in the air chips, which are built-in in the kit, and the vaporizer will do the rest.
Like most starter kits, the Mi-One Pro has two tanks that are removable. The tank on the bottom of the device is what holds the e-Cig liquid and when you put your finger on the heating element it heats up the bottom of the tank and releases the vapour into your mouth.
If your preference is to use the device without a lot of vapour, you just put the glass tube on top of the heater element. This gives you the ability to use this device without a lot of fuss.